The OnePlus 8 Pro has been the target of several leaks in recent months. Thanks to the renderings published on the internet, we know how to design the next high-end smartphone of the Chinese brand. Now, an image showing the back of the device has been leaked, confirming what we saw earlier.
It seems that the OnePlus 8 Pro follows the same pattern found in the OnePlus 7 Pro and 7T Pro, that is, sensors aligned vertically in the center. We can see that the module houses three cameras, but now there is an extra sensor on the left, which according to rumors ToF 3D. The LED flash was placed just below the module.
Unfortunately, the front of the smartphone was not shown, but according to the renderings, we will have a small "hole" in the upper left corner to house the camera, as well as curved edges.
Leaks point out that the OnePlus 8 Pro comes to the market with support for wireless charging, a technology that should not be inserted in the standard model. In addition, we can also expect a display OLED with 2K resolution and 120 Hz refresh rate, Snapdragon 865 processor, 8GB or 12GB of LPDDR5 RAM and 128GB, 256GB or 512GB of internal storage UFS 3.0.
In the camera department, the four sensors at the rear must add 64MP + 20MP + 12MP + ToF 3D. The front camera delivers 32MP, while the battery will be 4,500 mAh. In software, we will certainly have Android 10 installed at the factory.
So far, OnePlus has not revealed the launch date of its next flagships, but there is a possibility that they will be made official in March or April, this through an online event due to the coronavirus.